Fill and Base Material Delivered in Vale, OR

Oregon Rock Supply brings gravel and aggregate delivery in Vale, OR to builders, farmers and homeowners working on soft ground. The base material here is 3/4 minus, the crushed rock graded 3/4 inch down to fines that compacts and locks up under driveways, shop floors and shed pads.

This is Basin and Range country, where lake-bed silt and alkali ground move under a load. A pad that starts with the right fill and a graded base holds its shape.

Delivery to Vale and the Surrounding Area

You order online, choose a quantity by the ton or by the yard, and pick a delivery date at checkout. Each product page has a calculator if you want to size the load before you commit.

A dump truck tips the material on your site in one pile. Nothing is spread and nothing is placed, so have the spot clear before the truck arrives.

Oregon Rock Supply delivers across Vale and Malheur County, including Ontario, Nyssa, Adrian, Harper and Jordan Valley. Whether your site is in town or out on a rural parcel, the load comes to the address you enter at checkout.

Materials for Vale Projects

Ground in this part of Oregon often needs to come up before anything can be built on it. Fill and sub-base do that work: they raise grade, build up low spots and give a compacted layer for a finished surface to sit on.

Start with Fill Dirt when a pad, a building site or a low corner needs bulk material under it. It builds grade so a graded base course has something solid to rest on.

Over that goes 3/4 Minus, also called 3/4-0 or dense-graded base rock. It keeps its fines, so it compacts and locks up under driveways, parking pads and shop floors.

For a driveway surface, Driveway Gravel is a minus rock that compacts under tires instead of rolling. Quarry Run is raw rock straight from the pit face, used to build up soft ground before a graded base goes on top.

Where water has to move, Drain Rock is washed and open for French drains, footing drains and downspout runs. 3/4" Crushed Stone is the same idea in angular form, with the fines screened out, for drainage trenches and retaining wall backfill.

Ground and Conditions in Vale

Across the Basin and Range, Klamath and Owyhee Country, the basins are filled with lake-bed silt, alkali flats and playa ground, with basalt rims standing above them. That silt is the problem under a base.

It holds water and it moves. A base laid straight onto it without enough fill underneath will pump, shift and break up at the edges.

Precipitation here runs under 15 inches a year, but these basins are closed and have nowhere to send water. Playa and alkali ground stays soft and holds surface water after snowmelt.

Wind moves across bare playa and alkali flats, and sheet flow comes off the rims into the basins during snowmelt and summer storms. Both strip bare ground and cut at an under-built edge.

The working season is short, bounded by hard frost at both ends. Frozen ground and soft spring basins both stop compaction, so fill and base work has to fit between them.

Questions About Material in Vale

What is the best base under pavers in Vale?

Use 3/4 minus for the structural base, then bed the pavers on 1/4 minus, also called quarter minus. The 3/4 minus keeps its fines and compacts into a firm layer.

The 1/4 minus is fine enough to screed and level so the pavers sit flat without rocking. Both are ordered by the ton or the yard.

Do you supply contractors working in Vale?

Yes. Oregon Rock Supply delivers bulk aggregate to contractors across Vale and the rest of Malheur County, including Ontario, Nyssa, Adrian, Harper and Jordan Valley.

You order online, choose the quantity by the ton or by the yard, and pick a delivery date at checkout. The truck tips the load on site.

Order 3/4 Minus and Fill for Your Vale Site

3/4 minus is the base that carries a driveway, a shop pad or a shed floor in this ground, and fill dirt is what gets the grade up to it. Oregon Rock Supply delivers both across Vale and Malheur County.

Order online by the ton or the yard and pick your delivery date.