Skip to main content
FREE Delivery!|(971) 459-3124
Bulk Rock and Soil for Bend, OR Projects

Bulk Rock and Soil for Bend, OR Projects

Bend is a large city in Deschutes County, with a 2024 census estimate of 106926. Oregon Rock Supply provides bulk materials for new gravel drives, repairs to worn surfaces and site grading work. Start with a firm base, plan the finished depth and order enough material to cover the full area.

A driveway that has low spots or loose surface stone needs more than a thin top layer. Regrade the surface first, establish drainage away from the drive and compact each lift before placing the next one.

Materials for Bend Driveways, Drainage and Ground Cover

3/4 Minus is the working material for compacted driveway bases. It is also called 3/4 inch minus, dense grade or crushed base. The mix of larger aggregate and fines packs into a stable layer when placed in manageable lifts and compacted.

Drain Rock is available as 3/4 clean or 1 1/2 clean. Because it contains little fine material, water moves through the open spaces instead of sitting in the stone. Willamette River Rock, also called round rock or bar run rock, is used where a rounded finished appearance is wanted. Fill dirt handles rough grade changes, while Natural Pea Gravel and shredded mulch fit finish work around a completed project.

Ground, Frost and Drainage in Deschutes County

Ground conditions east of Oregon's mountain passes are dry, sandy and firm, with real frost. That means driveway preparation needs attention to both compaction and drainage. Shape the finished surface so water leaves the driving area instead of collecting in wheel paths.

Oregon's statewide frost-depth guide is 12 inches. Confirm frost-related depth requirements with the local building department before building footings, setting posts or installing other work that needs frost protection.

For a driveway base, place 3/4 Minus in compacted lifts rather than spreading the full depth at once. A light-duty drive uses a thinner base than a drive carrying repeated heavy loads, and soft spots need to be corrected before base rock goes down. Keep clean Drain Rock separate from dense base material so the drainage path stays open.

Delivery Planning for Bend and Nearby Towns

Delivery is available across Deschutes County, including 97701, 97702, 97703 and 97707. La Pine lies about 6 miles south of Bend, while Redmond lies about 20 miles north. Sisters lies about 23 miles northwest, and Culver lies about 36 miles north.

Prineville in Crook County lies about 42 miles northeast of Bend. When arranging delivery, provide a clear approach, room for a truck to turn and a firm place for the load to be placed. Mark overhead lines, gates, parked vehicles and any area that should stay clear.

Weather conditions and road access affect delivery planning. Book ahead when access is limited or when the project depends on a specific work sequence. If the material must go in separate locations, identify each drop area before the truck arrives.

Measure Before You Order

Use the calculator to enter the length, width and planned depth for each section of the project. Order online with a delivery date after confirming the drop location, access and material placement plan.

Frequently Asked Questions

Common questions about gravel and aggregate delivery in Bend, OR

Why is 3/4 Minus sold by the ton instead of by cubic yard?

Stone is sold by the ton because aggregate weight changes with the material and its moisture content. Cubic yards measure volume, while tons measure weight. Use area, planned depth and material type in the calculator to estimate the amount needed, then allow for the final compacted depth of 3/4 Minus.

What should go in a French drain or downspout outlet in Deschutes County?

Use Drain Rock around the perforated section of a French drain and around a downspout outlet where water needs an open path through the aggregate. The 3/4 clean and 1 1/2 clean sizes leave void spaces for water movement. Keep soil and dense base out of that drainage stone, since fines reduce those open spaces.

How do I keep a gravel driveway from rutting during spring work?

Repair ruts by removing loose material where needed, correcting low spots and rebuilding the surface with a compacted base. Grade the driveway to shed water before placing the top course. Compact each lift of 3/4 Minus, and avoid placing new rock over wet, unstable ground without first fixing the soft area.

Which material works best for a new Bend driveway base?

3/4 Minus is the standard choice for a compacted driveway base because its fines lock in around the larger aggregate. Build the depth for the traffic the drive will carry, then compact the material in lifts. Drain Rock belongs beside drains and outlets, not as the main compacted driving surface.

Nearby